Kärcher WD 5 P S V25/5/22 Workshop Wet and Dry Vacuum Cleaner

The Kärcher WD 5 P S V-25/5/22 Workshop is a refurbished wet and dry vacuum cleaner for your workshop, garage, cellar and renovation jobs. Its power socket with automatic on/off starts and stops the vacuum together with your power tool, so sawing and sanding dust disappears right where it is created. The 25 l stainless steel container, push-button filter cleaning and blower function make it an all-rounder for coarse and fine dirt as well as liquids. Every machine is tested and refurbished, so you get a dependable helper at a fair price. More sustainable vs new: you give a high-quality machine a second life.

Key features

• Power socket with automatic on/off for power tools (100 to 2,100 W)
• Push-button filter cleaning and patented filter removal
• Workshop accessories with a soft-bristle suction brush, crevice nozzle and flexible 1 m hose
• Practical blower function
• 25 l stainless steel container, 5 m cable and 2.2 m suction hose

Details

Dust extracted at the source. When planing, sawing or sanding, you plug your power tool straight into the socket on the vacuum. It switches on and off with the tool and extracts the dirt immediately.

Suction power that lasts. When performance drops, strong air pulses push dirt from the flat pleated filter into the container at the press of a button. You take the filter out of the filter box without touching the dirt, and you vacuum wet and dry without changing it.

Made for the workshop. The suction brush with soft bristles cleans workbenches and wooden surfaces gently. The switchable floor nozzle picks up sawdust and small pieces of wood, and with the removable handle you attach nozzles directly to the suction hose to reach tight spots.

Blower function. Where vacuuming is not possible, you clear leaves from a gravel bed, for example, or clean delicate and intricate objects gently.

Tidy and practical. You hang the suction hose on the device head, with a secure hold for left- and right-handed users. The cable wraps around the integrated hooks, and accessories are stored right on the unit. The parking position holds the suction tube and floor nozzle during breaks.

Technical highlights. 1,100 W rated input power, 280 W suction power, max. 260 mbar vacuum, max. 70 l/s air flow, 74 dB(A), 220 to 240 V. The machine weighs 8.9 kg (without accessories) and measures 418 × 382 × 646 mm.

What’s included

• 2.2 m suction hose with curved, removable handle
• 2 suction tubes (0.5 m each, 35 mm nominal width)
• Switchable wet/dry floor nozzle
• Crevice nozzle
• Flexible suction hose, 1 m, 35 mm
• Adapter for connecting power tools
• Suction brush with soft bristles
• 1 fleece filter bag (3-layer)

Typical use

You sand a table top in the workshop. You plug the sander into the socket on the vacuum, and both run together. Afterwards, you clear the corners with the crevice nozzle and clean the workbench with the soft suction brush.

Can I connect any power tool? Yes, as long as it falls within the socket’s range of 100 to 2,100 W. Tools in this range switch the vacuum on automatically.

Good to know

Every device is tested and refurbished before it reaches you. You get a Min 12-month warranty, and you can return it within our standard return window if it does not suit you.